O2 Innovations Network Router DSL Router User Manual

O2 DSL Router Classic  
Quick start guide  
Overview of the package contents and the necessary installation information  
You will require the following components to set up and configure your O2 DSL Router Classic. Please note that the O2 DSL Router Classic  
will only work once your telephone line has been activated. Please see your welcome letter for the activation date.  
Telephone outlet  
TAE outlet (F)  
Power outlet  
B
C
O2 DSL Router  
Classic1  
Power supply unit  
with power cable  
DSL cable  
2 adaptors for  
phone/fax  
A
B
C
D
ON/OFF switch  
RESET  
A
E
D
Ethernet/LAN  
cable  
O2 DSL Starter CD  
O2 DSL manual  
Welcome letter  
(received in advance)  
E
F
G
H
Phone/fax (analogue)  
Computer  
Tip: You will find English and Turkish versions of the quick start guide as PDF documents  
on the O2 DSL Starter CD in the »Handbücher« folder.  
Setting up and connecting the O2 DSL Router Classic  
Please only use your O2 DSL Router Classic in conjunction with your O2 DSL connection.  
2
1
Connecting the DSL router to the power supply  
Connecting the DSL router to the telephone socket  
Connect the power cable B to the DSL router A . Then plug the  
Connect the small connector on the DSL cable C to the grey DSL connector  
on the DSL router. Now insert the other end of the DSL cable into the  
telephone outlet, which is labelled with an (F) or a telephone symbol.  
A
power supply unit into a power outlet.  
Turn the DSL router on using the ON/OFF switch.  
B
The DSL router will now establish a DSL connection. During this time, the  
LEDs marked »DSL« and »INTERNET« will flash in succession.  
C
Once the blue LED lamp marked »POWER« is continuously illuminated,  
the DSL router is ready for use.  
Once the »DSL« LED is permanently illuminated and the »INTERNET« LED  
flashes, the DSL router has successfully established the internet connection.  
Note: This process may take up to 1 minute.  
Tip: When setting up the DSL router, please follow the safety notes  
in the manual.  
Note: This process may take up to 3 minutes.  
3
4
Connecting the phone/fax to the DSL router  
Connecting the DSL router to the computer  
Please wait until the blue »PHONE 1« and »PHONE 2« LEDs are  
permanently illuminated. You can now connect your phone/fax.  
The DSL router and computer are connected via LAN (with Ethernet cable).  
Connect the Ethernet/LAN cable E to one of the yellow Ethernet  
connections marked 14on the DSL router. Connect the second yellow  
plug on the cable to the network connection port on your computer.  
E
Note: This process may take between 3 and 5 minutes.  
Your phone/fax is connected directly to the DSL router and not to the  
telephone socket.  
Typ 1  
Typ 2  
If your telephone connector cable has a Type 1 plug (see top picture),  
connect this plug directly to one of the two DSL router connectors marked  
»PHONE 1« or »PHONE 2«.  
If your telephone connection cable has a Type 2 plug, please use one of the  
adapters supplied  
as shown in the adjacent picture.  
D
Tip: Connect the phone to the adapter via socket (F); fax via socket (N).  
D
Your phone/fax is now ready to use.  
1 The O2 DSL Router Classic only works with an O2 DSL tariff from O2 Germany. If you want to use it with a  
different DSL provider, the integrated calling function will not be available.  
Please turn over  
 

Milan Technology Switch mil s2400s User Manual
Moxa Technologies Network Card NPort 5400 User Manual
MTD Lawn Mower L04 User Manual
Murphy Switch M 6797B User Manual
National Mower Lawn Mower 02012 User Manual
Nortel Networks Switch 2500 Seriess User Manual
Oce North America Photo Printer 500XL User Manual
Oregon Digital Camera ATC 1000 User Manual
Panasonic Answering Machine KX TG313SK User Manual
Panasonic Vacuum Cleaner MC UG775 User Manual